Product

Rubber Lined Ball Mill

Rubber Lined Ball Mill

Rubber lined ball mil

The rubber lined ball mil are mainly used for the porcelain powder grinding, ore benefication of metal mine, and nonmetal mineral hill. The rubber lifespan and the economic benefit are better than high manganese liner, among which the effect to lower the energy and steel consumption, and mill noice is much remarkable. The liner are almost not affected by the slurry corrosion and wearing, that is, it showed very high worn proof character in the wet type ball mill, which make the lifespan double increase. Usually the liner has 1~2 time higher than the high manganese liner.

The ball mill Rubber  liner can reduce the energy consumption, by 10~15% in normal. It can also bring down the noise to improve the working environment, and lessen the ball energy consumption and finally get the lower production cost. The liner weight is lighter, and the lifespan of the gear get delay. The time for mill staying get less while the operation capacity and the processing ability get increased.

Main Technical Parameters:

Model Cylinder rotary speed(r/min) Loading ball weight(t) Input size(mm) Discharge size(mm) Capacity(t/h) Motor power (kw) Weight (t)
Ф900×1800 39 1.5 ≤20 0.075-0.89 0.8-2 18.5 4.6
Ф900×3000 39 2.7 ≤20 0.075-0.89 1-4 22 5.6
Ф1200×3000 36 3.5 ≤25 0.074-0.4 1.6-5 37 12.8
Ф1200×4500 32 5 ≤25 0.074-0.4 1.6-5.8 55 13.8
Ф1500×3000 27 7.5 ≤25 0.074-0.4 2-5 75 15.6
Ф1500×5700 28 12 ≤25 0.074-0.4 3.5-6 130 24.7
Ф1830×3000 25 11 ≤25 0.074-0.4 4-10 130 28
Ф1830×6400 24 21 ≤25 0.074-0.4 7-16 210 34
Ф1830×7000 24 23 ≤25 0.074-0.4 8-18 245 36
Ф2100×3600 23 19 ≤25 0.074-0.4 10-36 210 46
Ф2200×4500 21 27 ≤25 0.074-0.4 12-23 280 48.5
Ф2200×6500 21 35 ≤25 0.074-0.4 14-26 380 52.8
Ф2200×7000 21 35 ≤25 0.074-0.4 15-28 380 54
Ф2200×7500 21 35 ≤25 0.074-0.4 15-30 380 56
Ф2400×4500 21 30 ≤25 0.074-0.4 18-45 320 65
Ф2400×8000 20 36 ≤25 0.074-0.4 20-48 410 81
Ф2700×3600 21 39 ≤25 0.074-0.4 19-75 400 83
Ф2700×4000 20 40 ≤25 0.074-0.4 20-78 400 85
Ф2700×4500 20 48 ≤25 0.074-0.4 22-85 430 89
Ф3200×4500 18 65 ≤25 0.074-0.4 29-140 800 137
Ф3200×5400 18 81.6 ≤25 0.074-0.4 30-180 800-1000 146
Ф3600×4500 17 88 ≤25 0.074-0.4 35-210 1000 190
Ф3600×6000 17 117 ≤25 0.074-0.4 38-240 1250-1500 220
Ф3600×8500 17 144 ≤25 0.074-0.4 45-260 1800 260